DigitalDiagnost C50 1.1

Following a system restart where the Table Height 2 (TH2) is the default setting and then switched to Wallstand VS2, operators will see an incorrect orientation of the image on the first examination due to an issue in the firmware of the Wallstand VS2 board. The system will rotate the amplimat field selection by 90 degrees. The wrong amplimat field selection may cause an incorrect dose of radiation to occur. Additionally, the anatomic position markers may become mispositioned and could potentially be associated with the opposite side of the anatomy. (Added 1/3/2023), Expansion of the root cause to include incorrect amplimat field selection by 90 degrees following the first exposure using Wallstand VS2 and a subsequent system restart. Previously, this issue only occurred following a system restart where the Table Height 2 (TH2) is the default setting.

Official notice

More Philips North America Llc recalls

• FDA-Device2026-07-01
  Philips Avalon FM20 Fetal Monitor recalled for speaker connector assembly defect
• FDA-Device2026-07-01
  Philips Avalon Fetal Monitor, FM 30 Part numberM2703A
• FDA-Device2026-07-01
  Philips Telemetry Monitor 5500 1.4 GHz. Model Number: 867232. Includes the following system descriptions: TELE Monitor 5500, 1.4 Ghz, ECG only, ex; Telemetry Monitor 5500 1.4 GHz FAST EX.
• FDA-Device2026-06-17
  Philips DigitalDiagnost C90 Flex/Value/Chest/ER recalled for missing seismic stabilization kit