Indiana recalls

During 3D acquisitions, lighter and darker patient images may be captured, which may result in less accurate 3D reconstruction. The variation of brightness is a result of a constant unregulated medium dose and the angular change of patient diameter caused by rotational acquisition. This may result in unintentional low-dose radiation exposure to a patient.

Due to increased in complaints their is the potential for endoscopic clipping device to malfunction.

An internal component of the actuators in a certain production batch may not meet the required mechanical strength. This could result, in the worst case scenario, in a sudden loss of the actuator's ability to hold the load, leading to rapid and uncontrolled downward movement of the lifting arm.

The CORE Workstation may display an incorrect "Planning Date " when viewing cases on the "Start Case" menu screen.

it was found that in versions 1.3.7, 1.4.2, and 1.4.3, the Lock Screen and Limited Access Passcode Screen on the iLet graphical user interface (GUI) include certain icons displayed in the status bar that are active, thereby allowing the user to bypass those screens when those icons on the status bar are pressed, allowing unauthorized access while the device is in Limited Access Mode. A Health Risk associated with Limited access mode includes severe hypoglycemia due to unauthorized access to the iLet if someone were to make unauthorized meal announcements or stopped insulin delivery.

Products may report incorrect AST results during quality control. Health consequences may include delayed response or the need to change to another antifungal agent if laboratory ignores Quality Control test result.

Potential safety issue involving the Mean Aneurysm Flow Amplitude (MAFA) ratio of AneurysmFlow (Interventional Tool). Philips has determined that the MAFA ratio does not provide reliable prognostic information regarding aneurysm occlusion following Flow Diverter Stent treatment, however despite being stated in the IUF, it is being relied on for making clinical decisions.

Potential for the accumulation of small air bubbles in the arterial line due to adherence of blood gases to the tubing under negative pressure.

Potential for the accumulation of small air bubbles in the arterial line due to adherence of blood gases to the tubing under negative pressure.

Subpotent drug

Failed Stability Specifications

Failed Dissolution Specifications

Lack of Assurance of Sterility

Subpotent Drug

Subpotent Drug

Subpotent Drug

Labelling: Illegible label

Failed Viscosity Specifications: Out of Specification results, above the specification limit, in viscosity, noted during stability testing.

Failed Viscosity Specifications: Out of Specification results, above the specification limit, in viscosity, noted during stability testing.

Failed Viscosity Specifications: Out of Specification results, above the specification limit, in viscosity, noted during stability testing.

This recall is being initiated following FDA's recommendation based on certain observations noted during an August 15, 2025, inspection of the manufacturing facility that may bear on product quality.

This recall is being initiated following FDA's recommendation based on certain observations noted during an August 15, 2025, inspection of the manufacturing facility that may bear on product quality.

This recall is being initiated following FDA's recommendation based on certain observations noted during an August 15, 2025, inspection of the manufacturing facility that may bear on product quality.

This recall is being initiated following FDA's recommendation based on certain observations noted during an August 15, 2025, inspection of the manufacturing facility that may bear on product quality.

This recall is being initiated following FDA's recommendation based on certain observations noted during an August 15, 2025, inspection of the manufacturing facility that may bear on product quality.

This recall is being initiated following FDA's recommendation based on certain observations noted during an August 15, 2025, inspection of the manufacturing facility that may bear on product quality.

This recall is being initiated following FDA's recommendation based on certain observations noted during an August 15, 2025, inspection of the manufacturing facility that may bear on product quality.

This recall is being initiated following FDA's recommendation based on certain observations noted during an August 15, 2025, inspection of the manufacturing facility that may bear on product quality.

This recall is being initiated following FDA's recommendation based on certain observations noted during an August 15, 2025, inspection of the manufacturing facility that may bear on product quality.

This recall is being initiated following FDA's recommendation based on certain observations noted during an August 15, 2025, inspection of the manufacturing facility that may bear on product quality.