Consumer product recalls

The candle's jar can crack or break during use, posing laceration and burn hazards.

The recalled products contain diphenhydramine hydrochloride and acetaminophen which must be in child resistant packaging as required by the Poison Prevention Packaging Act (PPPA). The packaging of the products is not child resistant, posing a risk of poisoning if the contents are swallowed by young children.

The golf cart's front seat can become loose due to missing rubber grommets, posing fall and injury hazards to operators and/or passengers.

The fuel injector hose retainer screw can loosen and cause a fuel leak, posing a fire hazard.

The bike's seat post assembly can break during use, posing fall and injury hazards to the user.

The recalled utility knife can become unlocked and the blade can protrude only while in the original packaging, posing a laceration hazard.

The cabinets can detach from the wall, posing an impact hazard.

The glass cocktail shakers can crack and break during use, posing a laceration hazard.

Ball joint separation may cause a loss of steering control, increasing the risk of a crash.

A leak inside the brake module can cause an unexpected increase in brake pedal travel or unexpected movement during an Auto Hold event, increasing the risk of a crash.

A child seat that fails to properly restrain a child increases the risk of injury in a crash.

The recalled children's white robes fail to meet the federal flammability standards for children's sleepwear, posing a risk of burn injuries to children.

The heater fan can fail and cause the components to overheat, posing a fire hazard.

The paint on the children's metal doll pins contains levels of lead that exceed the federal lead paint ban, posing a lead poisoning hazard. Lead is toxic if ingested by young children and can cause adverse health effects.

When the rider engages the throttle and brake (including the parking brake) simultaneously on the recalled snowmobiles, the brake system can overheat in the caliper/pad/brake rotor area, posing a fire hazard and risk of burn injuries to the rider.

Under severe weather conditions, such as hurricanes, the adhesive bond holding the doorglass inserts can become separated from the door causing a risk of injury and property damage from windborne debris.

The recalled ATVs fail to comply with the mandatory requirements of the federal ATV safety standard, including parking brake requirements, posing a collision hazard to consumers if the vehicle is parked on an incline. The ATVs also fail to comply with other mandatory safety requirements for ATVs intended for children 10 years of age and older, including improper labeling and missing safety reflectors. ATVs that fail to meet the mandatory safety standard requirements pose a risk of serious injury or death.

The wooden slats supporting the bunk beds can break while in use, posing fall and impact hazards.

Excessive heat may cause the fuse to fail and result in a loss of drive power, increasing the risk of a crash.

The recalled drain covers do not conform to the entrapment protection standards of the Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing an entrapment hazard to swimmers and bathers.

The recalled drain covers do not conform to the entrapment protection standards of the Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing an entrapment hazard to swimmers and bathers.

The recalled drain covers do not conform to the entrapment protection standards of the Virginia Graeme Baker Pool and Spa Safety Act (VGBA), posing an entrapment hazard to swimmers and bathers.

The eyes on the toy can detach, posing a small part choking hazard to children.

The necklaces have high levels of cadmium. Cadmium is toxic if ingested by children and can cause adverse health effects.

The recalled ATVs fail to comply with the requirements of the federal mandatory ATV safety standard. The Ace-branded K125 and C125 models exceed the maximum speed limitations for vehicles intended for children aged 10 and older, posing a risk of high-speed crash. For T125 and C125 models, the parking brakes do not prevent movement of the vehicle, posing a collision hazard to consumers if the vehicle is parked on an incline. ATVs that fail to meet the mandatory safety requirements pose a risk of serious injury or death.

The recalled transceivers can unexpectedly enter search mode due to interference from other beacons. If this occurs, the device could fail to transmit the position of survivors of an avalanche, resulting in delayed search and rescue operations, which could result in severe bodily harm or death if the skier is buried under snow.

The power cord can become damaged near the cord bushing, which can lead to overheating of the cord, posing fire and burn hazards. In addition, cord damage near the bushing can result in exposed copper wires, posing a shock hazard.

Insufficient lubrication may cause the pinion tail bearing to seize, preventing the axle from rotating and increasing the risk of a crash.

A defective connection in the charging harness may short circuit, increasing the risk of a fire.

The recalled helmets do not comply with the positional stability requirements of the CPSC federal safety standard for bicycle helmets. The helmets can fail to protect a child in the event of a crash, posing a risk of head injury.