Consumer product recalls

Mislocated welds securing the upper front suspension arm mounting brackets to the frame. The mounting bracket could break off during riding, reducing rider control and resulting in loss of control of the ATV. Loss of control could result in a crash and severe personal injury or death.

The cap on the water tank can unexpectedly and forcibly project off when it is quickly unscrewed from the tank, posing a risk of impact injuries to users or bystanders. In addition, the rocket's tail can strike a user or bystander on descent, if the rocket is not fully launched, posing a risk of injury.

IN THE EVENT OF A CRASH, THE STRAP CAN RIP LEAVING THE WEARER UNPROTECTED, POSSIBLY RESULTING IN SERIOUS INJURIES OR DEATH.

SHOULD THE TAILGATE DROP DOWN, IT COULD CAUSE INJURIES TO THE USER.

These printers can short-circuit, posing an electrical shock hazard to consumers.

Inflator buttons can stick, which can cause uncontrolled inflation of the BC. This could cause divers to ascend too fast, resulting in decompression sickness as well as the danger of an embolism.

The SCUBA BC bladder can have a slow leak because of imperfections within the machining of the stainless air barrel of their inflators. This can cause unexpected buoyancy problems with divers, possibly resulting in decompression sickness.

The adapters can overheat, cause damage to the circuit board and melt through the housing, which poses a fire and electrical shock hazard to consumers.

Improper wiring can cause a short circuit, posing a fire hazard in the scooter. In addition, inadequate insulation may expose electrical wiring, which poses a shock hazard.

The Buggy Board's red connecting pins can break, causing the board to partially detach from the stroller or carriage, posing a fall hazard to the user.

If infants are placed on these pillows and left unattended, there is a risk of suffocation. Infant pillows and cushions are banned under the Federal law. Infant pillows have a flexible fabric covering, are loosely filled with plastic beads, easily flattened, intended for use by infants under 1 year old, and capable of conforming to the body or face of an infant.

If infants are placed on these pillows and left unattended, there is a risk of suffocation. Infant pillows and cushions are banned under the Federal law. Infant pillows have a flexible fabric covering, are loosely filled with plastic beads, easily flattened, intended for use by infants under 1 year old, and capable of conforming to the body or face of an infant.

These water slides have an excessive length of rope attached to the safety mat, that presents a risk of entanglement in the water. This poses a drowning hazard to users.

A POSSIBLE VEHICLE CRASH COULD OCCUR SHOULD THE SEAT FALL BACKWARDS DURING USE.

THE WHEEL SIMULATOR COULD DETACH WHILE THE VEHICLE IS IN MOTION, POSSIBLY RESULTING IN INJURIES.

The front column of the scooter does not meet impact resistance standards. The handlebar column can break if the scooter hits an object, which can cause the rider to fall and suffer injuries.

All of the appliances use faulty wiring, which can overheat, melt through the insulation and cause a short circuit. They may pose a shock hazard to consumers, if the appliance is not properly grounded.

The ranges and wall ovens have faulty wiring, which can melt and cause the oven to short circuit. The appliance can then stop working and pose a shock hazard to consumers.

The red paint on the chair contains excessive lead levels, posing a lead poisoning hazard to young children.

An internal short can cause the battery cells to overheat, posing a fire hazard to consumers.

The helmets do not comply with impact testing requirements in the Consumer Product Safety Act.

The stretch bar, which connects to the chair's legs, can detach during normal use, causing the user to fall and suffer injuries.

The dried apples and cinnamon in the candle can ignite, causing a flare up and breaking the glass, posing a fire hazard.

The 1.5-inch to 1.75-inch rubber tab at the top of the heel can detach from the shoe, posing a choking hazard to young children.

The UPS outputs were wired incorrectly, creating a reverse polarity configuration and a potential electrical shock hazard to consumers.

LOSS OF STEERING CONTROL COULD RESULT IN A VEHICLE CRASH, POSSIBLY RESULTING IN SERIOUS INJURY OR DEATH.

These ceiling fans were assembled without the proper wire insulation sleeving, which could result in exposed wiring. Consumers could receive an electrical shock during installation or removal.

Overheating around the socket (where the bulb fits into the light box) can result in melted plastic and smoke, posing a possible fire and burn hazard.

These bunk beds have gaps between parts of the upper bunk end structure that violate the federal safety standard, because they pose entrapment or strangulation hazards to children. The spaces exceed that allowed by the federal bunk bed safety standard, which is designed to protect children from entrapment and strangulation.