Consumer product recalls

IF THE USER IGNORES THE PROBLEM AND REFILLS THE TIRES TO MAINTAIN PRESSURE, THE CRACKS MAY PROPAGATE AROUND THE CIRCUMFERENCE OF THE WHEEL ALONG THE BEAD SEAT OF THE TIRE, CAUSING THE FACE OF THE WHEEL TO SEPARATE FROM THE RIM.

SEIZURE OF THE BEARINGS CAN CAUSE WHEEL SEPARATION OR WHEEL END FIRE.

Battery packs can detach from the power tool unexpectedly and strike the operator or bystander, resulting in injuries.

Two small metal screws that hold the toy "stall doors" in place can come off, posing an aspiration or choking hazard to young children.

The end piece of the drumstick handle can break off, posing a choking hazard to young children. Additionally, the screw at the end of the drumstick can loosen and detach, posing a choking hazard.

The stems on these bicycles can loosen during use, causing riders to lose control and fall.

The amplifier can overheat due to a lack of ventilation, which can cause melting of the plastic front cover and pose a shock hazard to consumers.

The ATVs may have loose or leaking oil cooler line clamps, that can release hot pressurized oil. This may lead to thermal burns, to engine failure due to oil pressure loss and, in rare circumstances, could cause a vehicle fire.

The product's design allows consumers to light the grill at an air intake tube, instead of at the burner. Though the grill appears to function normally, gas inside the air intake tube ignites. The tube can reach temperatures of up to 750 degrees Fahrenheit and present a burn hazard to consumers. In grills manufactured before August 1998, the heat produced by lighting the grill at the air intake tube damaged the plastic support piece, and caused the grill to fall to the ground. When it collapses, flames from the grill can burn nearby consumers and ignite surrounding combustibles.

The toy, which is designed to encourage crawling babies to pull themselves up and stand, can tip over during use and strike falling babies in the head, face or neck, resulting in injuries.

USING THE CAR ADAPTER WITH THE BATTERY CAN CAUSE THE ADAPTER TO OVERHEAT AND POSSIBLY MELT, CREATING A RISK OF FIRE IF FLAMMABLE MATERIAL IS NEARBY.

Some of the Fiddlesticks have caps that can become loose, allowing ball bearings to spill from the inside of the sticks. Both the caps and the ball bearings pose a potential choking hazard to young children.

IF THE KINGPIN BREAKS, THE SUSPENSION WILL COLLAPSE CAUSING LOSS OF VEHICLE CONTROL, POSSIBLE RESULTING IN A VEHICLE CRASH.

Front rail of crampon could be improperly heat-treated and toe points could bend, resulting in malfunction of the crampon.

The Party Popper is a rocket-shaped device that shoots into the air when the string is pulled. The cone-shaped top can pop off rapidly, and can hit and injure both children and adults.

A screw located inside the refrigeration compartment, on the left side of the refrigerator frame, could pierce through the electrical wire harness insulation and pose an electrical shock hazard.

THIS MAY CAUSE THE WIRE INSULATION TO MELT, POSSIBLY RESULTING IN A FIRE.

IF THIS EVENT OCCURS, THE VEHICLE OPERATOR WILL NOT HAVE CONTROL OF THE ENGINE SPEED WHICH COULD POSSIBLY RESULT IN A VEHICLE CRASH.

The paint on the metal wires of these toys contains excess levels of lead. Lead poisoning is a serious hazard to children and is associated with behavioral problems, learning disabilities, hearing problems and growth retardation.

An internal component can overheat, presenting risks of fire or thermal burns to consumers.

Buttons on the jacket of these toys can be pulled off, posing a choking hazard to young children.

The plastic fuel tank can crack and leak gasoline, posing a risk of fire and injury.

The lower blade guards on these saws can stick in the open position, exposing the blade and posing a serious laceration hazard.

The on-off switch on the routers could stick in the "on" position, posing a risk of serious lacerations to the operator and bystanders.

The range can experience a delayed ignition flashback fire in the upper oven, which poses a fire and burn hazard to consumers.

The toy chest's lid support hinges can fail, allowing the lid to fall onto a child's head, neck, fingers or hands. In addition, spaces at the end of the hinge on the lid can cause pinch, crush or laceration injuries to children's fingers.

FAILURE OF THE AXLE COULD RESULT IN LOSS OF STEERING, POSSIBLY RESULTING IN A VEHICLE CRASH.

The plug can break open and expose live wires, posing an electrocution or electric shock hazard to consumers.

The rubber petal and metal snap can break off of the jacket, posing a choking hazard to young children.

These helmets fail impact testing required under CPSC's Safety Standard for Bicycle Helmets, violating the Consumer Product Safety Act. Riders wearing these helmets are not adequately protected from falls, and could suffer head injuries.