Consumer product recalls

The glass ring exterior portion or trim of these lights can fall from the fixture, posing a risk of lacerations and impact injuries.

IF THE HANDLEBAR SHOULD BREAK, A RIDER COULD LOSE CONTROL OF THE MOTORCYCLE WHICH COULD RESULT IN A CRASH.

The eyes on these toys could detach, posing a choking hazard to young children.

The two bolts that attach the handlebars can break. If the handlebars separate from the motorcycle, the rider loses steering control and can crash, posing the risk of serious injuries.

A frame down tube on these motorcycles can crack below the steering head. Use of the motorcycle with a cracked down tube can result in failure of the frame, which can cause the rider to lose control of the motorcycle and crash, resulting in injury or death.

The power strips have undersized wires, lack over-current protection and grounding, and the plastic case is flammable. The extension cords have undersized wires and lack over-current protection. Both the power strips and the extension cords can overheat, presenting electrocution, shock and fire hazards.

The fans could overheat during use, and do not have sufficient guards to prevent possible finger entrapment. These fans present electrocution, shock, fire, and finger amputation hazards.

IF THE SHAFT BREAKS, THERE WILL BE NO SUPPORT FOR THE DRIVER'S FOOT.

The drawcord around the ankle of these slippers can break and release the toggle used to tighten the drawcord. The toggle presents a choking hazard to young children.

These paper shredders do not have a protective shield to guard against exposure to the cutting blades. Consumers could lift the paper shredder lid while it is running and come into contact with the turning blades. Consumers could suffer cuts or amputations of finger tips, if they touch the turning blades.

These helmets fail impact testing required under CPSC's Safety Standard for Bicycle Helmets, violating the Consumer Product Safety Act. Riders wearing these helmets are not adequately protected from falls, and could suffer severe head injuries or death.

The fans could overheat during use, present an electrocution hazard and do not have sufficient guards to prevent fingers from contacting the fan blades, posing the risk of finger amputations.

The toy has two elastic cords that form a loop, posing a strangulation risk to young children.

THIS CONDITION CAN CAUSE THE ABS SYSTEM TO CYCLE RAPIDLY AND EXTEND STOPPING DISTANCES DURING AN ABS CONTROLLED BRAKE APPLICATION POSSIBLY RESULTING IN A VEHICLE CRASH.

These radial arm saws were sold without a guard that covers the entire blade. Consumers have come into contact with the blade or have been hit by pieces of wood kicked back by the saws, resulting in severe injuries.

The circuit testers can fail to indicate if electric current is present, posing a risk of electric shock to consumers.

The seatbelts on these go-karts can unintentionally unlatch, posing a risk of serious injury to riders.

A mounting bracket on the front suspension of the Honda Rancher TRX350 models could be welded improperly to the frame. If this mounting bracket breaks, the vehicle could lose steering control and crash. The brake pads on the Honda TRX400EX models could have been assembled incorrectly. This can cause the brakes to fail, resulting in severe injury or death.

ANY OF THESE CONDITIONS CAN MAKE THE VEHICLE LESS CONSPICUOUS WHICH COULD RESULT IN A VEHICLE CRASH.

THIS INCOMPATIBILITY CAN RESULT IN BRAKE DRUM FAILURE AND AN IMMEDIATE LOSS OF BRAKING CONTROL AND OTHER RISKS OF DEATH OR INJURY.

An electric heating element inside the system, that is used primarily in the dehumidification process, can short circuit and produce sparks, posing a smoke and fire risk.

These garments, which fail to meet the federal mandatory standards for fabric flammability, could ignite easily and present a serious risk of burn injuries.

A HOOK ON A HOOD STRIKER FOR THE RESINOUS HOOD MAY SEPARATE FROM A BASE PLATE AT THE WELDED PORTION DUE TO INSUFFICIENT WELDING STRENGTH. THE HOOD MAY SUDDENLY OPEN DURING OPERATION, LOSING FRONT VISIBILITY, POSSIBLY RESULTING IN A VEHICLE CRASH.

The red mallet sold with the toy xylophone can get lodged in the throats of young children, posing a choking hazard.

WITHOUT THE REFLECTIVE MATERIAL, THE VEHICLE MAY NOT BE CLEARLY VISIBLE TO OTHER MOTORISTS WHICH COULD RESULT IN A VEHICLE CRASH.

The recall involves millions of window blinds with pull cords and inner cords that can form a loop and cause strangulation.

THE DEFECT COULD RESULT IN THE WHEEL COMING OFF THE VEHICLE WITHOUT WARNING, WHICH COULD RESULT IN A VEHICLE CRASH, INJURY TO THE OCCUPANT, AND/OR TO PEOPLE OUTSIDE THE VEHICLE.

Batteries in the unit can leak or explode, when used with an AC adapter. Consumers can suffer burns from the leaking battery or can be struck by pieces of an exploding battery.

These battery packs can short circuit, causing them to overheat, release smoke and possibly catch fire.

The screws that connect the mobile's arm assembly and crib clamp can become loose if overtightened. The arms can detach and fall into the crib, injuring the baby inside.