Medical device recalls

The stent-graft inside the delivery system was the incorrect size.

DeRoyal manufactured and distributed Surgical Tracecarts that contain a Nurse Assist 16FR Silver Urine Meter Foley which were subsequently recalled.

Neonatal pads are experiencing reduced water flow, which may reduce or prevent water heating or cooling performance of the pads that are part of a temperature management system.

A new contraindication was added to the IFU which states that Peri-Guard Repair Patch should not be used in neurosurgery since the product endotoxin level may be higher than the allowable limit for cerebrospinal fluid-contacting devices and Supple Peri-Guard Repair Patch should not be used in neurosurgery since the product endotoxin level may be higher than the allowable limit for cerebrospinal fluid-contacting devices.

A new contraindication was added to the IFU which states that Peri-Guard Repair Patch should not be used in neurosurgery since the product endotoxin level may be higher than the allowable limit for cerebrospinal fluid-contacting devices and Supple Peri-Guard Repair Patch should not be used in neurosurgery since the product endotoxin level may be higher than the allowable limit for cerebrospinal fluid-contacting devices.

A new contraindication was added to the IFU which states that Peri-Guard Repair Patch should not be used in neurosurgery since the product endotoxin level may be higher than the allowable limit for cerebrospinal fluid-contacting devices and Supple Peri-Guard Repair Patch should not be used in neurosurgery since the product endotoxin level may be higher than the allowable limit for cerebrospinal fluid-contacting devices.

A new contraindication was added to the IFU which states that Peri-Guard Repair Patch should not be used in neurosurgery since the product endotoxin level may be higher than the allowable limit for cerebrospinal fluid-contacting devices and Supple Peri-Guard Repair Patch should not be used in neurosurgery since the product endotoxin level may be higher than the allowable limit for cerebrospinal fluid-contacting devices.

On 07 February 2024 Beckman Coulter made the decision to conduct a field action on Access Substrate (81906) lots: 234600, 337984, 338040, 338214, 338229, 338289, 338322, 338333, 338451, 338587, and 338538. Beckman Coulter has identified that Access Substrate bottles in the identified lots were released from manufacturing without labels. Missing label may cause some patient results reporting delay but will not cause any errorreous results. However, because labs are required to have redundancy such that delay would not significantly impact clinical management and because the defect is easily recognized by the user, the probability of harm is remote.

Olympus has become aware of an increased trend of both repairs and customer complaints reporting "UHI-4 stopping air supply due to the front panel LED turning off".

An investigation determined that delivery of the Obsidio embolic using the aliquot technique for lower gastrointestinal bleeding embolization poses a high risk of bowel ischemia. The most serious and the most common adverse health consequence, reasonably foreseeable to occur, is the need to perform major surgery such as bowel resection and/or diverting colostomy. Therefore, Boston Scientific does not recommend that the aliquot technique be used to deliver the Obsidio device for lower GI bleed embolization procedures.

The issue was mismatched diluent lots assembled into VITRO Chemistry Products Performance Verifier I and II. This issue has the potential to cause erroneous Quality Control (QC) results that could lead to testing delays and erroneous patient results. This issue caused positive or negative bias in the quantification of sodium (Na+) and total carbon dioxide (ECO2). The incorrect diluent into the Performance Verifier II exhibited a potential negative bias of up to 6 mmol/L for ECO2 and Na+ testing.

The issue was mismatched diluent lots assembled into VITRO Chemistry Products Performance Verifier I and II. This issue has the potential to cause erroneous Quality Control (QC) results that could lead to testing delays and erroneous patient results. This issue caused positive or negative bias in the quantification of sodium (Na+) and total carbon dioxide (ECO2). The incorrect diluent into the Performance Verifier II exhibited a potential negative bias of up to 6 mmol/L for ECO2 and Na+ testing.

Use of assay along with plasma specimen may result in error code which would invalidate sample.

Medline Bulb irrigation syringes recalled due to potential for packaging sterile barrier to be breached, and these syringes were packed inside surgical procedure packs that were subsequently terminally sterilized, so after the packs are opened, syringes should be discarded at surgical case end, and not reshelved, because the use of non-sterile bulb irrigation syringes may increase infection risk.

Cystatin C Calibrator Series CVS 2699, is running with a negative bias compared to other methods

Japanese IFU version had slightly different language and illustrations from the English IFU, which could contribute to the tip and plate falling off. In order to maintain consistency globally, the Japanese IFU will be updated to reflect the instructions in the English IFU

Thermalon and MediBeads moist heat compresses from certain lots may have been exposed to excessive moisture, resulting in potential growth of mold and/or mildew.

Thermalon and MediBeads moist heat compresses from certain lots may have been exposed to excessive moisture, resulting in potential growth of mold and/or mildew.

Thermalon and MediBeads moist heat compresses from certain lots may have been exposed to excessive moisture, resulting in potential growth of mold and/or mildew.

Thermalon and MediBeads moist heat compresses from certain lots may have been exposed to excessive moisture, resulting in potential growth of mold and/or mildew.

Thermalon and MediBeads moist heat compresses from certain lots may have been exposed to excessive moisture, resulting in potential growth of mold and/or mildew.

Thermalon and MediBeads moist heat compresses from certain lots may have been exposed to excessive moisture, resulting in potential growth of mold and/or mildew.

Thermalon and MediBeads moist heat compresses from certain lots may have been exposed to excessive moisture, resulting in potential growth of mold and/or mildew.

Thermalon and MediBeads moist heat compresses from certain lots may have been exposed to excessive moisture, resulting in potential growth of mold and/or mildew.

Thermalon and MediBeads moist heat compresses from certain lots may have been exposed to excessive moisture, resulting in potential growth of mold and/or mildew.

Due to incorrect calibrations and controls, their is a potential of incorrect reporting of lower %IS and molecular response values.

The peroxide cross-linked tubing has leachables identified as NDL PCBAs.

The peroxide cross-linked tubing has leachables identified as NDL PCBAs.

The peroxide cross-linked tubing has leachables identified as NDL PCBAs.

The peroxide cross-linked tubing has leachables identified as NDL PCBAs.