Consumer product recalls

Electrical arcing may cause the lamp to overheat and melt, posing a burn hazard.

The hanging chairs can tip over when they face sideways and swing beyond the base, posing a fall hazard.

Under some driving conditions, when the ABS is activated, the malfunctioning ABS actuator could cause a loss of vehicle stability, increasing the risk of a crash.

The reduction in strength may result in premature axle failure, increasing the risk of a vehicle crash.

Use of an incorrectly sized wheel bearing can adversely affect the braking and steering of the vehicle, increasing the risk of a crash.

The battery can overheat, posing a fire hazard.

The water heater's combustion chamber can be misaligned and heat the exterior walls of the water heater instead of the water. Combustible material near the outside of the water heater can catch fire, posing fire and burn hazards.

The S1+ hardware can fail, resulting in an inability to transmit a discoverable signal during an emergency situation, even as the unit appears to be powered on and functioning properly.

The mower can start when the key is not in the starting position, posing an injury hazard to the user.

The front wheel hub can break and cause the disc brake system to fail, posing crash and injury hazards to the consumer.

The plastic around the base of the light bulb can melt, posing a burn hazard.

The youth ATVs fail to meet performance requirements of the federal ATV standard for maximum unrestricted speed and parking brakes, posing a crash hazard.

The locking mechanism can fail to hold the blade, posing a laceration hazard.

If the seat cover overheats melting the fabric, it can increase the risk of personal injury to the seat occupant or may result in a vehicle fire.

The module wiring is incorrectly installed, posing a shock hazard to consumers.

The stitching on the restraint straps can loosen which allows the straps to separate from the seat, posing a fall hazard to children.

The ranges' ovens can turn on by themselves, posing a burn hazard to consumers.

The burner flame can go out while the gas is turned on. This can allow gas to escape and poses fire and burn hazards.

The stainless steel trim below the range control panel can have a sharp edge, posing a laceration hazard to consumers.

The top and bottom roller chains in the winch can break, causing the winch and marine lift to fail. This can pose an injury hazard to the user or bystander.

The weld joining the front leg to the main frame can break, posing an injury hazard to the user.

The cup sleeve can ignite if used in a microwave, posing a fire hazard.

The filler cap at the top of the unit can crack and allow steam to escape, posing a risk of burns to the user. In addition, the cap can pop off unexpectedly as a result of pressure buildup, posing a risk of injury to a bystander.

The boots' snake guard can fail to protect the wearer's feet from a snake bite.

In the event of a crash necessitating deployment of the passenger’s frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

In the event of a crash necessitating deployment of the passenger’s frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

In the event of a crash necessitating deployment of the passenger’s frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

After the safety has been re-engaged, the crossbows can fire under certain circumstances if a consumer pulls the trigger, posing an injury hazard.

If the wheel studs break while the trailer is being used, wheel separation may occur, increasing the risk of a vehicle crash.