Consumer product recalls

The plastic marshmallow can ignite when it is used with a burning candle, presenting a fire and burn hazard.

The toys have small parts, which could come loose, posing a possible choking hazard to young children.

THIS CONDITION CAN CAUSE THE ABS SYSTEM TO CYCLE RAPIDLY AND EXTEND STOPPING DISTANCES DURING AN ABS CONTROLLED BRAKE APPLICATION, POSSIBLY RESULTING IN A VEHICLE CRASH.

The toy has a two-part red plastic connector on the pull string, designed to separate under tension. The plastic pieces can detach from the string when the connector is pulled apart and could pose a choking hazard to young children.

Small springs inside these toys can break loose, posing a choking and laceration hazard to young children.

The Kent scooter handles can unexpectedly come out of the steering column if the clamp holding them in is not tight, causing the rider to lose control, fall and possibly suffer injuries. For the Kash 'N Gold scooters, the plastic "T" joint between the handlebars can break, causing the rider to lose control, fall and possibly suffer injuries.

The disc brakes on these bicycles can stick and prevent the brake pads from returning to the proper position, when the brake lever is released. This can cause the rider to lose control and crash.

The pacifiers failed CPSC testing standards. These pacifiers present a choking hazard to infants.

The stem connects the bicycle's handlebars to the fork. These stems can break during use, causing the bicycle rider to crash and suffer serious injuries.

Some sets have alcohol burners that can produce high flames beyond the intended-cooking surface of the fondue pot. Another set, which uses chafing fuel, is being recalled because the chafing fuel holder could tip as it burns down. Both problems present potential fire and burn hazards to consumers.

WITHOUT THE REFLECTIVE MATERIAL IN THE REAR TAIL LAMP, A VEHICLE WITH THESE LAMPS MAY NOT SEEN BY A FOLLOWING MOTORIST, INCREASING THE RISK OF A CRASH.

The gun cabinets have push button locks that can be opened without the use of a key, allowing unauthorized access to firearms.

The high chairs are adjustable and have both recline and upright positions. In the recline position, the seats can separate from the frame and fall to the ground. In the upright position, the seats can slip from their set height position to the lowest position or can fall to the ground. Additionally, some seats were sold with a metal restraint anchor that can slip through the back of the seat, allowing the child to fall to the ground. Infants and toddlers can suffer head, face and bodily injuries.

The glass ring exterior portion or trim of these lights can fall from the fixture, posing a risk of lacerations and impact injuries.

IF THE HANDLEBAR SHOULD BREAK, A RIDER COULD LOSE CONTROL OF THE MOTORCYCLE WHICH COULD RESULT IN A CRASH.

The eyes on these toys could detach, posing a choking hazard to young children.

The two bolts that attach the handlebars can break. If the handlebars separate from the motorcycle, the rider loses steering control and can crash, posing the risk of serious injuries.

A frame down tube on these motorcycles can crack below the steering head. Use of the motorcycle with a cracked down tube can result in failure of the frame, which can cause the rider to lose control of the motorcycle and crash, resulting in injury or death.

The power strips have undersized wires, lack over-current protection and grounding, and the plastic case is flammable. The extension cords have undersized wires and lack over-current protection. Both the power strips and the extension cords can overheat, presenting electrocution, shock and fire hazards.

The fans could overheat during use, and do not have sufficient guards to prevent possible finger entrapment. These fans present electrocution, shock, fire, and finger amputation hazards.

IF THE SHAFT BREAKS, THERE WILL BE NO SUPPORT FOR THE DRIVER'S FOOT.

The drawcord around the ankle of these slippers can break and release the toggle used to tighten the drawcord. The toggle presents a choking hazard to young children.

These paper shredders do not have a protective shield to guard against exposure to the cutting blades. Consumers could lift the paper shredder lid while it is running and come into contact with the turning blades. Consumers could suffer cuts or amputations of finger tips, if they touch the turning blades.

These helmets fail impact testing required under CPSC's Safety Standard for Bicycle Helmets, violating the Consumer Product Safety Act. Riders wearing these helmets are not adequately protected from falls, and could suffer severe head injuries or death.

The fans could overheat during use, present an electrocution hazard and do not have sufficient guards to prevent fingers from contacting the fan blades, posing the risk of finger amputations.

The toy has two elastic cords that form a loop, posing a strangulation risk to young children.

THIS CONDITION CAN CAUSE THE ABS SYSTEM TO CYCLE RAPIDLY AND EXTEND STOPPING DISTANCES DURING AN ABS CONTROLLED BRAKE APPLICATION POSSIBLY RESULTING IN A VEHICLE CRASH.

These radial arm saws were sold without a guard that covers the entire blade. Consumers have come into contact with the blade or have been hit by pieces of wood kicked back by the saws, resulting in severe injuries.

The circuit testers can fail to indicate if electric current is present, posing a risk of electric shock to consumers.

The seatbelts on these go-karts can unintentionally unlatch, posing a risk of serious injury to riders.