Medical device recalls

Multiple lots being recalled due to a product design issue

LED display, which provides infusion or patient monitoring values, on the module may have segments that appear dim.

LED display, which provides infusion or patient monitoring values, on the module may have segments that appear dim.

LED display, which provides infusion or patient monitoring values, on the module may have segments that appear dim.

LED display, which provides infusion or patient monitoring values, on the module may have segments that appear dim.

LED display, which provides infusion or patient monitoring values, on the module may have segments that appear dim.

Modular Junction Box (MJB) cables can melt and affect the bed functionality.

In affected software version, of Positron emission tomography and computed tomography system, the CT Hounsfield unit curve may not display in real time when using the bolus tracking protocol with the tracker scan function. If this occurs, the subsequent clinical scanning protocols will need to be started manually, which may effect image enhancement, and may result in patient rescan.

The products were improperly heat treated.

Suspect poor weld on back KD bar.

May have one or more dimensional features out of tolerance includes: thread pitch diameter depth, thread minor diameter depth, plate thickness and end length out of tolerance that can potentially result in a reduced locking strength of an LCP screw

The rivets that secure the elastic headband to the face shield have the potential to be mis-assembled. When this condition occurs, it can result in a headband that can become loose from face shield allowing the face shield to shield on the user.

Mislabeled outer carton: packaged with the outer carton label stating the contents were the 70143662 Smart Piston but the inside package contents was the 70142158 Stapes Piston; see image below

Mislabeled outer carton: packaged with the outer carton label stating the contents were the 70143662 Smart Piston but the inside package contents was the 70142158 Stapes Piston; see image below

A problem has been detected with the Philips LI-Polymer rechargeable battery when used with its approved charging station and module charger. When the battery is inserted into a charger bay, the LED indicatory lights solid red and the battery will not charge. This may result from poor electrical contact between the battery and charger.

A problem has been detected with the Philips LI-Polymer rechargeable battery when used with its approved charging station and module charger. When the battery is inserted into a charger bay, the LED indicatory lights solid red and the battery will not charge. This may result from poor electrical contact between the battery and charger.

A problem has been detected with the Philips LI-Polymer rechargeable battery when used with its approved charging station and module charger. When the battery is inserted into a charger bay, the LED indicatory lights solid red and the battery will not charge. This may result from poor electrical contact between the battery and charger.

FDA revocation of the Emergency Use Authorization due to performance issues

FDA revocation of the Emergency Use Authorization due to performance issues

FDA revocation of the Emergency Use Authorization due to performance issues

Sterile introducer sheath set manufactured under one lot with different expiration dates.

While operating the machine in "Run" mode an unexcepted event may occur during the error-checking for stepper movements and pressure values. The result of this event is a false alarm being thrown and in rare cases results in an incomplete move which will affect the current inhale/exhale cycle.

The lidstock states the incorrect expiration date for the product. This issue could result in use of a device that is expired which could potentially lead to an increased risk of infection or other complications. Sterility, biocompatibility, safety, or efficacy of the kits and their components are not assured beyond the correct expiration date.

The lidstock states the incorrect expiration date for the product. This issue could result in use of a device that is expired which could potentially lead to an increased risk of infection or other complications. Sterility, biocompatibility, safety, or efficacy of the kits and their components are not assured beyond the correct expiration date.

The lidstock states the incorrect expiration date for the product. This issue could result in use of a device that is expired which could potentially lead to an increased risk of infection or other complications. Sterility, biocompatibility, safety, or efficacy of the kits and their components are not assured beyond the correct expiration date.

The lidstock states the incorrect expiration date for the product. This issue could result in use of a device that is expired which could potentially lead to an increased risk of infection or other complications. Sterility, biocompatibility, safety, or efficacy of the kits and their components are not assured beyond the correct expiration date.

1) Service function problem may cause false marking of a bad channel resulting in ring artifacts; 2) Potential intermittent scout scanning interruption due to angle signal drift caused by external interference; 3) Metal edge overlap of mylar strip in gantry may create sharp edge. May lead to repeat scanning and abrasions (N/A for Serial No. 200036)

1) 1) Potential intermittent issue may cause image data problems, may lead to artifacts; 2) Potential intermittent scout scanning interruption due to angle signal drift caused by external interference; 3) Metal edge overlap of mylar strip in gantry may create sharp edge. May lead to repeat scanning and abrasions.

The catalog ( REF ) number on the peelable inner labels (patient sticker) that is on the inner container (box) is incorrect. It states BAR-A8-10MM instead of BAR-A8-8MM.

Hardware removal kit does not include drivers to remove Dart-Fire 2.5 and 3.0mm Headless screws.