Louisiana recalls

GE HealthCare has become aware of an unlikely situation where potential loss of ECG and SpO2 monitoring involving ApexPro CARESCAPE Telemetry Server (CTS) v5.0 and v6.0, can result from a persistent NO COMM or OFF NETWORK condition at the CARESCAPE Central Station or CIC Pro Clinical Information Center (Central Station).

GE HealthCare has become aware of an unlikely situation where potential loss of ECG and SpO2 monitoring involving ApexPro CARESCAPE Telemetry Server (CTS) v5.0 and v6.0, can result from a persistent NO COMM or OFF NETWORK condition at the CARESCAPE Central Station or CIC Pro Clinical Information Center (Central Station).

A limited number of Pocket Adaptor Kits, Model 64001 and 64002, are labeled with incorrect Use-By-Dates.

Incorrect inner package labeling. Boxes labeled 4010-02-15-T3 markers may contain individual packages labeled as T4 Markers.

Retrospective submission for following issues identified: 1. Alarm failures, power-path faults, electrical-short risks, and inaccurate motor-current sensing were identified in certain AIC consoles. 2. There is improper alignment between the purge cassette and the motor drive in the AIC. This can result in a piston block event and lead to the inability to complete priming of the purge system, requiring the user to switch to backup AIC console.

Medline kits were distributed containing Huons Bupivacaine Hydrochloride in Dextrose Injection, USP, which was subsequently recalled due to quality issues, including microbiology testing data integrity concerns and reported efficacy complaints.

Nitrile Exam Glove failed to meet specifications chemical permeation performance.

A retrospective review identified that there are AIC units requiring specific hardware updates to address potential safety concerns. These hardware updates have been implemented through Abiomed s servicing process; therefore, AICs that have not received service are pending these updates. Issue 1: The proximity of the internal Video Graphics Array cable to the Digital Signal Processor chipset on the Impellatronic printed circuit assembly could potentially result in Electrostatic Discharge coupling into the Digital Signal Processor which may interrupt motor controls. Issue 2: There is a potential for the Compact Flash Memory Card dislodgement due to external applied forces, which could result in AIC startup failures and data logging issues. Issue 3: Improper routing of the fan wire within the AIC could lead to fan wire damage, which may result in console boot-up failure. Issue 4: Potential capacitor related issues on the Power Battery Manager, including the potential for the capacitors to cause pump stop, purge stop, and/or single fan fuse failures.

Labeling update concerning proximal clasp disconnection from the outer control tube which may prevent stent graft from being released from the delivery system.

Possible cross-contamination resulting in undeclared allergen ingredient (Peanut)

Failed Stability Specifications

Failed Impurities/Degradation Specifications: Elevated levels of oxidative-related impurities, exceeding shelf-life specifications during stability testing of individual units.

Brooklyn, NY – Prime Food Processing LLC is voluntarily recalling 69 cases of “Dried Herring Fish” because the product was not adequately eviscerated. The sale of uneviscerated fish is prohibited under New York State Agriculture and Markets regulations because Clostridium botulinum spores are more

MAY 29, 2026 – Champion Foods LLC of New Boston, Michigan, is voluntarily recalling certain batches of Motor City Pizza Co. 5 Cheese Bread (“5 Cheese Bread”) because they have the potential to be contaminated with Salmonella. This action follows a California Dairies, Inc. milk powder recall due to a

FOR IMMEDIATE RELEASE – May 28, 2026 – Sheridan, Wyoming. Better Weather Actives LLC is voluntarily recalling ALL lots of Better Weather Fix Elixir 15 ml because the products may contain undeclared Mitragynine and Mitragynine Pseudoindoxyl (MP). MP is a more potent derivative of Mitragynine, or Kra

The recalled dressers are unstable if they are not anchored to the wall, posing tip-over and entrapment hazards that can result in risk of serious injuries or death to children. The dressers violate the mandatory safety standard as required by the STURDY Act.

The recalled toys violate the?mandatory safety standard for toys?because the mini flashlight included with the fidget spinner balls contains button cell batteries that can be easily accessed by children. If button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries,?including internal chemical burns, and death.

The racket sets violate the mandatory standard for toys because the screw on the racket used to secure the battery compartment does not remain attached when opened, and the button cell batteries in the shuttlecock can be easily accessed by children. If button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, including internal chemical burns, and death.

Consumers can place their fingers in a pinch point, when adjusting the lounge chair, posing an amputation risk.

The recalled sauna blankets can overheat, posing fire and burn hazards.

The recalled coin batteries are not in child-resistant packaging and do not bear the warning labels required under Reese's Law. When button cell or coin batteries are swallowed, the ingested batteries can cause serious injuries, internal chemical burns, and death.

The recalled magnetic balls violate the mandatory standard for toys because they are loose high-powered magnets, posing an ingestion hazard to children. When high-powered magnets are swallowed, they can attract each other, or other metal objects, and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.

The magnets violate the mandatory safety standard for magnets because the high-powered magnets fit within CPSC's small parts cylinder and are stronger than permitted, posing a deadly ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other, or other metal objects, and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.

The sauna's steam diffuser can be positioned too close to a consumer's body, allowing hot steam to come in contact with user, posing a burn hazard.

Bazzini, LLC, of Allentown, PA, a co-manufacturer utilized by SkinnyDipped®, is voluntarily recalling a limited number of cases of SkinnyDipped® Dark Chocolate Coconut Almond Bites, out of an abundance of caution, due to the possible presence of undeclared peanut allergen. People who have allergies

The deaeration hose in X-ray tube cooling units type CU3101, manufactured between February 2016 and May 2020, may degrade over time, potentially resulting in oil leakage. Oil leakage may affect the cooling performance of the X-ray tube. When the oil flow drops below a certain threshold, the system automatically switches to low-dose fluoroscopy and displays the message Low load fluoroscopy flavor selected: Tube cooler problem . This condition cannot be resolved by restarting the system.

The deaeration hose in X-ray tube cooling units type CU3101, manufactured between February 2016 and May 2020, may degrade over time, potentially resulting in oil leakage. Oil leakage may affect the cooling performance of the X-ray tube. When the oil flow drops below a certain threshold, the system automatically switches to low-dose fluoroscopy and displays the message Low load fluoroscopy flavor selected: Tube cooler problem . This condition cannot be resolved by restarting the system.

The deaeration hose in X-ray tube cooling units type CU3101, manufactured between February 2016 and May 2020, may degrade over time, potentially resulting in oil leakage. Oil leakage may affect the cooling performance of the X-ray tube. When the oil flow drops below a certain threshold, the system automatically switches to low-dose fluoroscopy and displays the message Low load fluoroscopy flavor selected: Tube cooler problem . This condition cannot be resolved by restarting the system.

Due to stain present on the surface of affected foley catheters.

Potential safety issue with Philips Azurion systems, where longitudinal and transverse table movements may be impacted due to mechanical wear of the Float Tabletop control on the control module.