West Virginia recalls

Medline's ENFIT G-tube connectors (Item No. ENFIT1010GC) were not made to the correct specifications and may not seal properly with ENFit-style medical devices. This can cause leakage of feeding fluids and delay necessary care. If users tighten the connector too much to stop the leak, it can cause infection, discomfort, and require additional medical treatment.

Ultradent Products is recalling Jiffy Original Composite Polisher Cups (Coarse) 12pk because the cups may crumble or break apart during use. This could delay dental treatment. The affected product has lot number 529983 and expiration date of September 2, 2031.

The surgical light assembly in Stryker CHROMOPHARE Softlit Ring systems may not adequately support the weight of the ceiling cover. This could potentially cause the cover to fall. No injuries have been reported.

Mentor Texas has recalled Artoura Breast Tissue Expanders because some infusion sets may have dull or blunt needle tips. This can make the needle difficult to insert during the expansion procedure and may cause the needle to break.

The infusion sets included with certain Mentor Artoura Breast Tissue Expanders may have dull or blunt needle tips. This defect can make it difficult to insert the needle during the inflation procedure and may cause the needle to break.

Mentor Texas, LP is recalling Artoura Breast Tissue Expanders because the infusion sets (the needle and delivery mechanism) may have dull or blunt needle tips. This can make it difficult to insert the needle during the expansion procedure or cause the needle to break.

Mentor Texas breast tissue expanders used in reconstruction surgery may have infusion sets with dull or blunt needle tips. These needles may be difficult to insert during the expansion process and could break inside the device. No injuries have been reported.

Mentor Texas has recalled CPX 4 breast tissue expanders because the infusion sets may have dull or blunt needle tips. This can make the needle difficult to insert during treatment or cause it to break. No injuries have been reported.

Mentor Texas has recalled CPX 4 US Breast Tissue Expanders because some infusion sets may have dull or blunt needle tips. These dull needles can be hard to insert and may break during use. No injuries have been reported.

Mentor Texas is recalling certain CPX 4 breast tissue expanders because the infusion sets may have a dull or blunt needle tip. This can make it difficult to insert the needle or cause it to break during use. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain Azurion 5 M20 X-ray imaging systems where the X-ray may not start or may start and stop unexpectedly. This affects 920 systems worldwide, including 168 in the U.S. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain Azurion 5 M12 X-ray imaging systems that may prevent X-ray imaging from starting or cause it to work intermittently. This affects specific system serial numbers distributed worldwide. No injuries have been reported.

Philips Medical Systems has identified a problem with the wired foot switch on certain Azurion 7 M20 X-ray imaging systems. The foot switch may fail to initiate X-ray imaging or cause imaging to occur intermittently, which could affect patient care and diagnostic imaging procedures.

Philips Medical Systems has identified a problem with the wired foot switch on certain Azurion 7 M12 X-ray imaging systems. When using the foot switch, X-ray imaging may not start or may start and stop intermittently. This affects approximately 1,994 systems sold worldwide, including 360 in the U.S.

Philips Medical Systems has identified a problem with the wired foot switch on certain Azurion 7 B20 X-ray imaging systems. The foot switch may fail to start X-ray imaging or cause imaging to stop and restart intermittently during use. This affects approximately 1,500 units worldwide, including about 320 in the United States.

Philips has identified a problem with the wired foot switch on certain Azurion 7 B12 X-ray imaging systems. The foot switch may fail to start X-ray imaging or may cause imaging to occur intermittently, which could affect clinical workflow. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain Azurion 3 M15 X-ray imaging systems where X-ray imaging may not start or may work intermittently. This affects specific serial numbers of the system manufactured by Philips Medical Systems Nederland B.V. and distributed worldwide.

Philips identified a problem with the wired foot switch on certain Azurion 3 M12 X-ray imaging systems. The foot switch may fail to start X-ray imaging or cause imaging to work intermittently. About 298 systems worldwide are affected, including 27 in the U.S.

Philips has identified a problem with the wired foot switch on certain Allura Xper FD20/15 operating room tables. When using the foot switch, X-ray imaging may not start or may stop and start unexpectedly. This affects a small number of systems worldwide.

Philips has identified a problem with the wired foot switch on certain Allura Xper FD20/15 X-ray imaging systems where the X-ray may not start or may start and stop unexpectedly. This affects 296 systems distributed worldwide, including 68 in the US. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain Allura Xper FD20/20 OR Tables where X-ray imaging may not start or may work intermittently. Five units have been affected outside the United States. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain Allura Xper FD20/20 X-ray imaging systems. The foot switch may fail to start X-ray imaging or cause imaging to work only intermittently, which could affect clinical procedures.

Philips has identified a problem with the wired foot switch on certain Allura Xper FD20/10 X-ray systems that may prevent imaging from starting or cause it to work intermittently. This affects 85 systems worldwide, including 20 in the United States. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain ALLURA Xper FD10 operating room tables where X-ray imaging may not start or may work only intermittently. Two units worldwide are affected. No injuries have been reported.

Philips has found that the wired foot switch on certain ALLURA Xper FD20 operating room tables may fail to start X-ray imaging or may work only intermittently. This affects 4 units worldwide. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain ALLURA Xper FD20 surgical X-ray tables. The switch may fail to start X-ray imaging or may cause imaging to work only intermittently, which could disrupt surgical procedures. This affects 196 units worldwide.

Philips has identified a problem with the wired foot switch on certain ALLURA Xper FD20 Biplane X-ray systems where imaging may not start or may work intermittently. This affects 461 units worldwide, including 198 in the US. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain ALLURA Xper FD20 X-ray systems where imaging may not start or may start intermittently. This affects specific serial numbers across three system codes. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain ALLURA Xper FD10/10 X-ray systems where imaging may not start or may work on and off intermittently. This affects 112 systems distributed worldwide, identified by specific serial numbers.

Philips has identified a defect in the wired foot switch on certain ALLURA Xper FD10 X-ray imaging systems that may prevent X-ray imaging from starting or cause it to work intermittently. This could delay or disrupt imaging procedures. Philips is working with healthcare facilities to resolve the issue.