Mississippi recalls

Medtronic has recalled certain MiniMed 780G insulin pumps due to software defects that can cause the pump to deliver too much insulin, too little insulin, or stop delivering insulin entirely. These defects appeared after software updates (versions 6.60, 6.61, and 6.62) and may result in dangerously high or low blood sugar levels. The recall affects over 26,000 pumps with specific serial numbers.

AMO has recalled certain TECNIS Eyhance intraocular lenses (IOLs) used in cataract surgery because a small number may have a defect where the lens haptic (support arm) sticks to the optic, preventing proper unfolding during implantation. This affects 361 lenses distributed across 12 U.S. states. No injuries have been reported.

A material mix-up had occurred during the manufacturing of Straumann¿ Custom Abutments. More specifically, a raw material bar of TAN-material (SAP #701924 / Lot 7130439) was incorrectly identified as a Titanium Bar Ti Gr4 D (SAP #701922 / Lot 7130430). As a result, RC Titanium abutments were manufactured using the TAN Bar material on Mill-from-Bar Machine 396-06.

Straumann USA LLC recalled certain Custom Abutment Ti units (catalog number 027.4620) because of a manufacturing error. A raw material bar made of TAN material was mistakenly labeled and used instead of the correct Titanium Grade 4 material during production. This affects 13 units distributed in the US and Canada.

Koven Technology's BiDop 3 Pocket Doppler ultrasound device was distributed with labeling that claims it can be used for fetal applications, but the FDA never approved it for that use. The device is only cleared to detect blood flow in blood vessels, not for fetal monitoring. Using it for unapproved purposes could lead to incorrect results or missed diagnoses.

Orthalign's Trimax Drill Plate (Size 6-7, REF 402567) in some units may cut bone larger than intended during knee surgery. The defect affects 7 units distributed in Utah. No injuries have been reported.

Orthalign drill plates (Trimax-Pegged, Sizes 1–5, REF 402566) in one lot may have been made outside specifications. This could cause bone cuts larger than intended during knee surgery. Seven units were distributed in Utah.

Philips is clarifying and updating labelling on certain X7-2 ultrasound transducers to better define their useful life in the field. This affects a small number of units distributed nationwide. No injuries have been reported.

Philips is clarifying labeling on certain X3-1 ultrasound transducers to better define their useful lifespan in clinical use. This affects a small number of devices distributed nationwide. No injuries have been reported.

Philips Ultrasound, Inc. is providing clarification and updated labeling for the S5-2 Ultrasound Transducer to define its useful life in the field. This affects a limited number of units distributed nationwide.

Philips is recalling certain S4-1 ultrasound transducers to clarify and update labeling that defines how long these devices can be safely used in clinical settings. No injuries have been reported. The recall affects 41 units distributed nationwide.

Philips is clarifying and updating labeling on certain OMNI III TEE ultrasound transducers to better define their useful life in the field. This is a precautionary measure affecting 75 units distributed nationwide.

Philips is clarifying the useful life labeling on certain OMNI II TEE Ultrasound Transducers to ensure healthcare facilities have accurate information about when these devices should be replaced. Two units with specific serial numbers (02P8MV and 02MH3J) were affected and distributed nationwide.

Philips is clarifying labeling on certain Mini Multi TEE Ultrasound Transducers to better define when these devices should no longer be used in clinical settings. The affected units may lack clear guidance on their useful lifespan, which could affect safe operation.

Philips is clarifying labeling on certain L17-5 Ultrasound Transducers to better define their useful life in clinical use. This affects 2 units with specific model and serial numbers distributed nationwide. No injuries have been reported.

Philips is clarifying and updating labeling on certain L12-5 ultrasound transducers to better define their useful life in the field. This affects 40 units distributed nationwide. No injuries have been reported.

Philips Ultrasound, Inc. is clarifying labeling on the C9-4 ultrasound transducer to better define how long the device remains safe and effective in clinical use. This affects a very limited number of units distributed nationwide.

Philips is clarifying and updating labeling on certain 3D6-2 Ultrasound Transducers to better define their useful life in the field. This affects a limited number of units distributed nationwide. No injuries have been reported.

Philips Respironics has recalled Trilogy Evo Universal ventilators (software version 1.05.15.00) because using certain non-pneumatic nebulizers with these machines may cause a mismatch between the breathing volume set by your doctor and the volume your lungs actually receive. This could affect the effectiveness of your ventilation therapy.

Philips Respironics has recalled Trilogy EV300 ventilators (software version 1.05.15.00) because using them with certain types of nebulizers can cause the device to deliver a different amount of air to the patient than what was set. This mismatch between the intended and actual breath volume could affect patient safety.

Philips Respironics has recalled certain Trilogy Evo O2 home ventilators because using non-pneumatic nebulizers with them may cause a mismatch between the breath volume set on the machine and the volume actually delivered to the patient. This discrepancy could result in the patient receiving too much or too little air during ventilation.

Philips Respironics has identified an issue with Trilogy Evo ventilators when used with certain non-pneumatic nebulizers. The ventilator may deliver a different amount of air to the patient than the setting shows, which could affect treatment effectiveness. Philips is working with health care providers and regulators on a solution.

Olympus has identified that two adapter models (MAJ-1443 and MAJ-1444) are no longer compatible with OER-Pro and OER-Elite automated endoscope reprocessors. This means these adapters cannot be safely used with these reprocessing machines. No injuries have been reported.

Olympus has identified that certain adapter models (MAJ-1443 and MAJ-1444) are no longer compatible with the OER-Elite and OER-Pro automated endoscope reprocessors. This incompatibility could affect proper cleaning and sterilization of medical equipment.

Olympus endoscope air/water valves (models MAJ-1443 and MAJ-1444) are no longer compatible with OER-Pro and OER-Elite automated endoscope reprocessors. Using these valves with these reprocessors may result in incomplete or improper cleaning of endoscopes.

Olympus endoscope suction valves (models MAJ-1443 and MAJ-1444) are no longer compatible with Olympus OER-Pro and OER-Elite automated cleaning systems. Using these valves with these reprocessors may result in improper cleaning and sterilization of medical equipment.

Beckman Coulter has recalled MicroScan Neg MIC 56 antimicrobial susceptibility testing panels (Catalog C42464, Lot 2026-01-03) due to potential contamination in the test wells. These panels are used by laboratories to identify bacteria and test antibiotic resistance. Contaminated panels could produce inaccurate test results.

I.T.S. GmbH has recalled certain plates and screws used in pelvic reconstruction surgery because new testing shows they may heat up more than expected during MRI scans under certain conditions. This was not fully described in the original instructions. No injuries have been reported.

I.T.S. GmbH has recalled certain cortical screws, locking stabilization screws, and HLS plates used in hand surgery. New MRI safety testing found these implants may heat up more than expected during MRI scans under certain conditions. The original instructions did not reflect this updated safety information.

I.T.S. GmbH headless compression screws used in orthopedic surgery may heat up more than expected during MRI scans under certain conditions. Updated safety testing found higher temperature increases than the original instructions stated. This affects specific lot numbers of these implants distributed across the United States.