North Dakota recalls

Intuitive Surgical has recalled certain da Vinci S and Si Grasping Retractor instruments (Model 420278) due to reports of broken or frayed grip cables. The cables transmit motion from the surgeon's controls to the instrument tip during minimally invasive surgery. A cable failure could affect the surgeon's ability to control the instrument during a procedure.

Intuitive Surgical has recalled certain da Vinci S and Si Mega Needle Driver surgical instruments due to complaints of broken or frayed grip cables. These cables transmit motion from the surgeon's controls to the instrument tip inside the patient. The issue affects specific batch numbers manufactured between 2010 and 2018.

Intuitive Surgical has recalled certain da Vinci S and Si Double Fenestrated Grasper reusable surgical instruments due to reports of broken or frayed grip cables. The cables transmit motion from the surgeon's input to the instrument tip inside the patient. A cable failure during surgery could compromise the surgeon's ability to control the instrument.

Intuitive Surgical is recalling specific batches of da Vinci S and Si Monopolar Curved Scissors (model 420179) used in robotic surgery systems. The grip cables inside these instruments can break or fray during use, which could affect the surgeon's ability to control the instrument during a procedure.

Olympus identified a defect in the 24V power supply module in some SOLTIVE Pro laser systems that may cause the device to stop working. In some cases, smoke or a burning smell may occur inside the laser console, though the design contains any smoke within the enclosure where it will self-extinguish.

Olympus identified a defect in the 24V power supply module in some SOLTIVE Premium laser systems that may cause the device to stop working. In some cases, smoke or a burning smell may occur inside the laser console, though the design contains any smoke within the internal enclosure where it will self-extinguish.

Medline Industries identified a potential breach in the sterile pouch packaging of one lot of Sterile Radiology Procedure Kits (Model DYNDH1491B). This breach may allow the kit to lose its sterile condition. No injuries have been reported.

Philips Vue Motion V12 cardiac imaging software (Product Number 1017979, software versions 12.2.0 through 12.2.8.500) may display image frames out of sequence during dynamic cine runs. This could cause medical staff to review cardiac images in the wrong order, potentially affecting diagnosis.

Medline Industries recalled two G-tube care kits (SKU DYKM2720 and SKU ENFITDISCKIT) because the connectors were not made to the right size. This means they may not seal properly with ENFit-style feeding tubes, which could cause leakage of nutrition or fluids. If you try to tighten the connector to stop leaking, it could cause injury, infection, or discomfort.

Medline's ENFIT G-tube connectors (Item No. ENFIT1010GC) were not made to the correct specifications and may not seal properly with ENFit-style medical devices. This can cause leakage of feeding fluids and delay necessary care. If users tighten the connector too much to stop the leak, it can cause infection, discomfort, and require additional medical treatment.

The surgical light assembly in Stryker CHROMOPHARE Softlit Ring systems may not adequately support the weight of the ceiling cover. This could potentially cause the cover to fall. No injuries have been reported.

Mentor Texas has recalled Artoura Breast Tissue Expanders because some infusion sets may have dull or blunt needle tips. This can make the needle difficult to insert during the expansion procedure and may cause the needle to break.

The infusion sets included with certain Mentor Artoura Breast Tissue Expanders may have dull or blunt needle tips. This defect can make it difficult to insert the needle during the inflation procedure and may cause the needle to break.

Mentor Texas, LP is recalling Artoura Breast Tissue Expanders because the infusion sets (the needle and delivery mechanism) may have dull or blunt needle tips. This can make it difficult to insert the needle during the expansion procedure or cause the needle to break.

Mentor Texas breast tissue expanders used in reconstruction surgery may have infusion sets with dull or blunt needle tips. These needles may be difficult to insert during the expansion process and could break inside the device. No injuries have been reported.

Mentor Texas has recalled CPX 4 breast tissue expanders because the infusion sets may have dull or blunt needle tips. This can make the needle difficult to insert during treatment or cause it to break. No injuries have been reported.

Mentor Texas has recalled CPX 4 US Breast Tissue Expanders because some infusion sets may have dull or blunt needle tips. These dull needles can be hard to insert and may break during use. No injuries have been reported.

Mentor Texas is recalling certain CPX 4 breast tissue expanders because the infusion sets may have a dull or blunt needle tip. This can make it difficult to insert the needle or cause it to break during use. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain Azurion 5 M20 X-ray imaging systems where the X-ray may not start or may start and stop unexpectedly. This affects 920 systems worldwide, including 168 in the U.S. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain Azurion 5 M12 X-ray imaging systems that may prevent X-ray imaging from starting or cause it to work intermittently. This affects specific system serial numbers distributed worldwide. No injuries have been reported.

Philips Medical Systems has identified a problem with the wired foot switch on certain Azurion 7 M20 X-ray imaging systems. The foot switch may fail to initiate X-ray imaging or cause imaging to occur intermittently, which could affect patient care and diagnostic imaging procedures.

Philips Medical Systems has identified a problem with the wired foot switch on certain Azurion 7 M12 X-ray imaging systems. When using the foot switch, X-ray imaging may not start or may start and stop intermittently. This affects approximately 1,994 systems sold worldwide, including 360 in the U.S.

Philips Medical Systems has identified a problem with the wired foot switch on certain Azurion 7 B20 X-ray imaging systems. The foot switch may fail to start X-ray imaging or cause imaging to stop and restart intermittently during use. This affects approximately 1,500 units worldwide, including about 320 in the United States.

Philips has identified a problem with the wired foot switch on certain Azurion 7 B12 X-ray imaging systems. The foot switch may fail to start X-ray imaging or may cause imaging to occur intermittently, which could affect clinical workflow. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain Azurion 3 M15 X-ray imaging systems where X-ray imaging may not start or may work intermittently. This affects specific serial numbers of the system manufactured by Philips Medical Systems Nederland B.V. and distributed worldwide.

Philips identified a problem with the wired foot switch on certain Azurion 3 M12 X-ray imaging systems. The foot switch may fail to start X-ray imaging or cause imaging to work intermittently. About 298 systems worldwide are affected, including 27 in the U.S.

Philips has identified a problem with the wired foot switch on certain Allura Xper FD20/15 operating room tables. When using the foot switch, X-ray imaging may not start or may stop and start unexpectedly. This affects a small number of systems worldwide.

Philips has identified a problem with the wired foot switch on certain Allura Xper FD20/15 X-ray imaging systems where the X-ray may not start or may start and stop unexpectedly. This affects 296 systems distributed worldwide, including 68 in the US. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain Allura Xper FD20/20 OR Tables where X-ray imaging may not start or may work intermittently. Five units have been affected outside the United States. No injuries have been reported.

Philips has identified a problem with the wired foot switch on certain Allura Xper FD20/20 X-ray imaging systems. The foot switch may fail to start X-ray imaging or cause imaging to work only intermittently, which could affect clinical procedures.