Fall hazard recalls

The recalled tower stools can collapse or tip over while in use, and a child's torso can fit through the openings on the front and back sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.

The recalled tower stools can collapse or tip over while in use, and a child's torso can fit through the openings on the front and back sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.

The recalled tower stools can collapse or tip over while in use, and a child's torso can fit through the openings on the front and back sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.

The zipline kit's steel cable, turnbuckle and seat can detach or break during use, posing a fall hazard. The zipline spring brakes are not stiff enough to safely slow a rider down and the kit design does not include an emergency brake, posing collision and fall hazards.

The recalled bed rails violate the mandatory standard for adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. The bed rails do not meet structural stability or retention strap requirements, posing a fall hazard. Additionally, the bed rails' push pins and push pin holes are incorrectly sized, posing a laceration hazard.

The recalled tower stools can collapse or tip over while in use, and a child's torso can fit through the openings on the front and back sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.

The recalled toddler towers can tip over while in use, posing a risk of serious injury and death, due to tip over and fall hazards.

The recalled infant walkers violate the mandatory standard for infant walkers because they can fit through a standard doorway and fail to stop at the edge of a step, posing a risk of serious injury or death due to a fall hazard.

The recalled baby loungers violate the mandatory safety standard for?infant sleep products. The sides are too low to contain an infant and the enclosed openings at the foot of the loungers are wider than allowed, posing serious risks of fall and entrapment hazards to infants. In addition, the baby loungers do not have a stand, posing a fall hazard if used on elevated surfaces. These violations create an unsafe sleeping environment and can cause death or serious injury.

The baby loungers violate the mandatory standard for Infant Sleep Products because the sides are shorter than the minimum side height limit to secure the infant; the sleeping pad's thickness exceeds the maximum limit, posing a suffocation hazard; and an infant could fall out of an enclosed opening at the foot of the lounger or become entrapped. The portable loungers do not have a stand, posing a fall hazard. These violations create an unsafe sleeping environment for infants, posing a risk of serious injury or death.

The recalled car seat adapters can fail to properly attach to the stroller, which may allow the car seat to fall, posing a risk of serious injury from a fall hazard.

Given the increased number of leaks reported by users, it was determined to be the appropriate course of action to notify users of the potential for the occurrence of Bicarby luer-lock leaks during manipulation of the frangible and tubing when preparing the product for use for treatment. This issue presents the potential of a slip and fall hazard associated with fluid on the floor.

The recalled bed rails violate the mandatory standard for adult portable bed rails, because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. The bed rails do not meet structural stability or retention strap requirements, posing a fall hazard. Furthermore, the bed rails' push pins and push pin holes are incorrectly sized, posing a laceration hazard. In addition, the bed rails do not bear the required hazard warning labels.

The affected interlock switches can become stuck in a retracted position, allowing the exterior door to remain unlocked, posing a risk of death or serious injury if the elevator is called to another floor.

The recalled portable hook-on chairs violate the mandatory standard for portable hook-on chairs because the crotch restraints can be removed without the use of a tool and infants can fall through an opening, posing a deadly fall hazard.

The recalled tower stools can collapse or tip over while in use, and a child's torso can fit through the openings on the front and back sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.

The platform inside the recalled tower can loosen over time, causing it to become unstable or detach, and ultimately posing a fall hazard to young children.

The recalled harness' D-ring can release, allowing the attachment point to open, posing a risk of serious injury or death from a fall hazard.

The recalled harnesses are missing rivets in the FAST LT PIN-LOCK buckles, causing the buckles to open, posing a risk of serious injury or death from a fall hazard.

The swing seat can detach from the frame while in use, posing a risk of serious injury or death from a fall hazard.

The ATV's speed limiter control can malfunction, causing unexpected speed and acceleration, posing a serious risk of injury or death from crash hazard.

The recalled light fixture's frame can detach from the pendant downrod during installation, posing a risk of serious injury or death from an impact hazard.

The recalled bed rails violate the mandatory standard for adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. The bed rails do not meet structural stability or retention strap requirements, posing a fall hazard. Furthermore, the bed rails' push pins and push pin holes are incorrectly sized, posing a laceration hazard.

The handlebar's clamp can unexpectedly cause the handlebar to rotate, posing a risk of serious injury or death due to a crash hazard.

A loose screw can cause the front tube to fold down unexpectedly, posing a risk of injury from a fall hazard.

The elevator's StrikeLock hoistway door locking device can allow the elevator cab to move with a landing door open, posing a risk of serious injury or death due to fall and injury hazards.

The recalled bed rails violate the mandatory standard for adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. The bed rails also do not meet structural stability or retention strap requirements, posing a fall hazard. The bed rails' push pins and push pin holes are incorrectly sized, posing a laceration hazard. In addition, the bed rails do not bear the required hazard warning labels.

The baby loungers violate the mandatory standard for infant sleep products because the sides are shorter than the minimum side height limit to secure the infant and they do not have a stand, posing a fall hazard. Additionally, an infant can fall out of the enclosed opening at the foot of the lounger or become entrapped. Furthermore, the sleeping pad's thickness exceeds the maximum limit, posing a suffocation hazard. These violations create an unsafe sleeping environment for infants, posing a risk of serious injury or death.

The recalled tower stools can collapse or tip over while in use and a child's torso can fit through the openings on the tower's sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.

The recalled tower stools can collapse or tip over while in use and a child's torso can fit through the openings on the tower's sides, posing a risk of serious injury and death due to tip over, fall and entrapment hazards.