Fall hazard recalls

The bike's fork steerer tube can develop a small fatigue crack that can lead to a progressive failure of the fork, posing a fall hazard.

The recalled chairs' base can bend, posing a fall hazard.

The rivets used to support the swing seat can fail, posing a fall hazard to children.

The window opening control devices can break or detach after accidental or other impact, allowing the window to be opened, posing fall and serious injury hazards.

The high chairs violate the mandatory standard for high chairs because they were sold without the required attached crotch restraint, posing a deadly fall hazard for children. In addition, a child's head can become trapped between the seat and the side of the high chair, posing a deadly entrapment hazard.

The recalled bed rails violate the mandatory standard for adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. The bed rails do not meet structural stability or retention strap requirements, posing a fall hazard. The bed rails' push pins and push pin holes are incorrectly sized, posing a laceration hazard.

The recalled bed rails violate the mandatory standard for adult portable bed rails because users can become entrapped within the bed rail or between the bed rail and the side of the mattress, posing a serious entrapment hazard and risk of death by asphyxiation. The bed rails do not meet structural stability or retention strap requirements, posing a fall hazard. The bed rails' push pins and push pin holes are incorrectly sized, posing a laceration hazard.

The legs of the chairs and barstools can bend or break while the chair is in use, posing a fall hazard.

The rear wheel bolts can break when torqued, causing the wheel to separate from the bicycle, posing a fall hazard.

The recalled chairs' legs can break, posing injury and fall hazards to consumers.

The recalled chairs can crack and collapse, posing injury and fall hazards.

The recalled baby loungers violate the mandatory safety standard for Infant Sleep Products. The sides are too low to contain an infant and the enclosed openings at the foot of the loungers are wider than allowed, posing serious risks of fall and entrapment hazards to infants. In addition, the baby loungers do not have a stand, posing a fall hazard if used on elevated surfaces. These violations create an unsafe sleeping environment and can cause death or serious injury.

The recalled baby loungers violate the mandatory safety standard for Infant Sleep Products. The sides are too low to contain an infant and the enclosed openings at the foot of the loungers are wider than allowed, posing serious risks of fall and entrapment hazards to infants. In addition, the baby loungers do not have a stand, posing a fall hazard if used on elevated surfaces. These violations create an unsafe sleeping environment and can cause death or serious injury to infants.

The pedal axle can crack, causing the pedal to detach from the crank, posing a fall hazard to the rider.

If the chandelier is hung at an angle on a vaulted ceiling or a sloped beam, the chandelier's canopy hardware can break, causing the chandelier to detach and fall from the ceiling, posing an impact hazard.

The component that connects the recalled chandelier light fixture to the ceiling mount is not threaded properly and the fixture can fall unexpectedly, posing a risk of injury from impact.

The trike frame can develop a hairline fracture near a weld, which can cause the tubes to separate, posing fall and laceration hazards.

The buckles securing the restraints around the child can release during use, posing a fall hazard.

The recalled infant walkers violate the mandatory standard for infant walkers because they can fit through a standard doorway and fail to stop at the edge of a step, posing a deadly fall hazard. In addition, the infant walkers have leg openings that allow the child to slip down until the child's head can become entrapped, posing a risk of serious injury or death.

The bolts on the chainring can come loose, causing the chainring to separate from the bike, resulting in a fall or crash hazard to the user.

During assembly or disassembly, the 215-pound frame of the wall bed can fall onto consumers, posing deadly impact, crush, and laceration hazards.

The high chairs violate the mandatory standard for high chairs because they were sold without the required attached restraint system, posing a deadly fall hazard to babies. In addition, a child's head can become trapped in the opening between the seat and tray, posing a deadly entrapment hazard.

The recalled baby loungers violate the mandatory safety standard for Infant Sleep Products. The sides are too low to contain an infant and the enclosed openings at the foot of the loungers are wider than allowed, posing serious risks of fall and entrapment hazards to infants. In addition, the baby loungers do not have a stand, posing a fall hazard if used on elevated surfaces. These violations create an unsafe sleeping environment and can cause death or serious injury.

The recalled baby loungers violate the mandatory safety standard for Infant Sleep Products. The sides are too low to contain an infant and the enclosed openings at the foot of the loungers are wider than allowed, posing serious risks of fall and entrapment hazards to infants. In addition, the baby loungers do not have a stand, posing a fall hazard if used on elevated surfaces. These violations create an unsafe sleeping environment and can cause death or serious injury.

The recalled baby loungers violate the mandatory safety standard for Infant Sleep Products. The sides are too low to contain an infant and the enclosed openings at the foot of the loungers are wider than allowed, posing serious risks of fall and entrapment hazards to infants. In addition, the baby loungers do not have a stand, posing a fall hazard if used on elevated surfaces. These violations create an unsafe sleeping environment and can cause death or serious injury to infants.

The riding mower's steering arm dampers can be installed incorrectly, which can result in an unexpected bouncing motion and loss of operator control, posing a crash hazard.

The platform inside the tower can collapse, posing a fall hazard to young children.

The recalled baby loungers violate the mandatory standard for Infant Sleep Products. The sides are too low to contain an infant. The enclosed openings at the foot of the loungers are wider than allowed, posing fall and entrapment hazards to infants. In addition, the baby loungers do not have a stand, posing a fall hazard, if used on elevated surfaces. These violations create an unsafe sleeping environment and can cause death or serious injury to infants.

The stroller violates the mandatory standard for strollers because the restraint system can fail, posing a risk of serious injury or deadly fall hazard.

The coaster brakes can fail to engage, resulting in the rider losing control, posing a crash hazard.