Massachusetts recalls

The recalled children’s fingerpainting kits contain the hazardous substances methanol and ethylene glycol and are intended for children under 12 years of age, which violate the Federal Hazardous Substances Act. The products also contain a regulated phthalate, which violate the federal phthalate ban; phthalates are toxic if ingested by young children and can cause adverse health effects.

The pens in the recalled children's handwriting kits contain levels of lead in the nib that exceed the federal lead content ban. Lead is toxic if ingested by young children and can cause adverse health issues.

The recalled book's felt parts can detach, posing a choking hazard.

The magnetic stick figure toy sets violate the mandatory standard for toys because they contain loose magnets, posing an ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other, or other metal objects, and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.

The high chairs violate the mandatory standard for high chairs because they were sold without the required attached crotch restraint, posing a deadly fall hazard for children. In addition, a child's head can become trapped between the seat and the side of the high chair, posing a deadly entrapment hazard.

The recalled magnetic chess games violate the mandatory standard for toys because they contain loose magnets posing an ingestion hazard to children. When high-powered magnets are swallowed, the ingested magnets can attract each other, or other metal objects, and become lodged in the digestive system. This can result in perforations, twisting, and/or blockage of the intestines, blood poisoning and death.

The recalled bath seats violate the mandatory standard for infant bath seats because they are unstable and can tip over while in use, posing a risk of serious injury or death due to drowning.

Moisture trapped inside the bath foam set container can cause pressure to build up, allowing pieces to be forcefully ejected when opened, posing an impact hazard.

The recalled pig and toilet lighters violate the mandatory standard for cigarette lighters because they do not have the required child-resistant mechanisms, posing a serious risk of injury or death from fire and burn hazards. The recalled pig and toilet lighters violate the mandatory standard for cigarette lighters because they do not have the required child-resistant mechanisms, posing a serious risk of injury or death from fire and burn hazards.

The recalled lighters violate the mandatory standard for multipurpose lighters because they do not have the required child-resistant mechanisms, posing a risk of serious injury or death from fire and burn hazards. The lighters also violate the labeling requirements under the Federal Hazardous Substances Act by missing required safety information.

The steam cleaner's boiler can rupture if it is overfilled, corroded and the pressure release valve malfunctions, posing risk of burn hazards or serious injury to users or bystanders.

The retaining pins used to secure the LED board inside some units can degrade, the LED board to come loose inside the fixture, posing a fire hazard.

The recalled gates violate the mandatory standard for expansion gates and expandable enclosures because a child's torso can fit through the opening between the gate and the floor, posing a risk of serious injury due to entrapment.

An error event following the release of a software version for the surgical system that can result in loss of user interface content on an external monitor or tower monitor.

Due to a need to update the product labeling (Instructions for Use IFU) as a result of the magnetized surgical tools dislodging markers using during target tissue removal procedures.

Products were mislabeled as the 6mm product but included the 5 mm product.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.

Medline has identified issues related to calibration of the equipment used to sterilize and package the devices. All products were exposed to the validated sterilization and packaging cycles; however, the identified calibration issues have the potential to impact the sterility assurance level (SAL) of the Recalled Products.